Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand Special Offer
Best reviews of Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand. Look at our special deals today on our store. Get more and spend less when you buy Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand. Also read our Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand reviews before you decide to buy Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand. Anything you have to know about this item, More about this
Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand Reviews
Many customers was gave reviews and ratings to Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand. If you want to read those detail to make your decision on this product just CLICK HERE
Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand Overview:
- 2-bike freestanding rack stand
- Independent adjustment arms
- Vinyl-coated cradles protects bikes, no bolts, screws, or fasteners required
- 79 by 26 by 19 inches (height by length by depth)' 20 pounds
- Lifetime warranty
Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand Reviews, On Sale Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand, buy Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand, Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand best buy, Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand Discount, Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand For Sale
Diamondback Bikes Deals Best Laptop Bags The Best Laptop Deals
Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand Reviews
147 of 153 people found the following review helpful 
Just what I wanted!, January 24, 2004 By Ashiko (Bay Area, CA) - See all my reviews This review is from: Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand (Tools & Home Improvement) I've been wanting a bike rack like this for years. I've tried products that seemed similar, and they just didn't work for me. This one's exactly what I was looking for.APPEARANCE
The rack arrived with no scratches. This was a surprise, given that two of the sections that make up the vertical post were loose in the manufacturer's box, and the box was a bit battered.
The rack itself looks great in my garage.
STABILITY
When positioned against (or near) a wall, the rack sways mildly when a bike is removed or replaced. The base is big enough and the overall design is such that removing the bottom bike (gently) doesn't seem to cause the whole thing to fall over--as long as the wall is there for backup. The manufacturer recommends anchoring the rack to the wall and includes hardware for this purpose.
ASSEMBLY
The central post is delivered in three sections: The base is the curved "T" that you can see in the picture on the Amazon site. The other two... Read more
161 of 171 people found the following review helpful 
You get what you pay for, June 27, 2005 By rj (Davis, CA USA) - See all my reviews Amazon Verified Purchase This review is from: Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand (Tools & Home Improvement) Arrived with box shredded, but items inside well-protected by ancillary packaging. For the price, it's a lot of metal. Went together easily. The problems started when I tried to put bikes on it. For a women's bike, with a sloping top bar, it is hard to balance on the stand. To make matters worse, this bike's balance point was at the seat. So, the stand's holders would slide forward on the bike (due to the sloping bar), then the bike would tip backward (due to the balance point now being well behind the support points). I had to put one of the bike rack's hooks into the frame of the bike basket to stop this sliding and tipping.
Then, the rack tilted, due to the torque on the rack from the upper bike. This, even though I had screwed the rack into the wall with the supplied #10 3inch screw (with a Pozidriv head--great if you have a Pozidriv bit (like I do), but problems otherwise).
The screw eventually tore out of the wall--It was barely long enough to go through... Read more
41 of 44 people found the following review helpful Pretty darn good, March 28, 2006 By This review is from: Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand (Tools & Home Improvement) THis went together in 10 minutes. In fact it took longer for me to decide where to put it than it did to put it together. I highly recommend attaching it to the wall with the screw. Mine came with a long screw (long enough to go into a stud behind 1/2" sheetrock) and a machine bolt with a toggle anchor that would be suitable for a location without a stud.
Mine holds two bikes perfectly. Each side of the holders are seperate so you can easily have one higher than the other for bikes with slanting cross-bars.
› See all 368 customer reviews...
| 147 of 153 people found the following review helpful Just what I wanted!, By Ashiko (Bay Area, CA) - See all my reviews This review is from: Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand (Tools & Home Improvement) I've been wanting a bike rack like this for years. I've tried products that seemed similar, and they just didn't work for me. This one's exactly what I was looking for.APPEARANCE The rack itself looks great in my garage. STABILITY ASSEMBLY 161 of 171 people found the following review helpful You get what you pay for, By rj (Davis, CA USA) - See all my reviews Amazon Verified Purchase This review is from: Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand (Tools & Home Improvement) Arrived with box shredded, but items inside well-protected by ancillary packaging. For the price, it's a lot of metal. Went together easily. The problems started when I tried to put bikes on it. For a women's bike, with a sloping top bar, it is hard to balance on the stand. To make matters worse, this bike's balance point was at the seat. So, the stand's holders would slide forward on the bike (due to the sloping bar), then the bike would tip backward (due to the balance point now being well behind the support points). I had to put one of the bike rack's hooks into the frame of the bike basket to stop this sliding and tipping.Then, the rack tilted, due to the torque on the rack from the upper bike. This, even though I had screwed the rack into the wall with the supplied #10 3inch screw (with a Pozidriv head--great if you have a Pozidriv bit (like I do), but problems otherwise). The screw eventually tore out of the wall--It was barely long enough to go through... Read more 41 of 44 people found the following review helpful Pretty darn good, By This review is from: Racor Pro PLB-2R Two-Bike Gravity Freestanding Bike Stand (Tools & Home Improvement) THis went together in 10 minutes. In fact it took longer for me to decide where to put it than it did to put it together. I highly recommend attaching it to the wall with the screw. Mine came with a long screw (long enough to go into a stud behind 1/2" sheetrock) and a machine bolt with a toggle anchor that would be suitable for a location without a stud.Mine holds two bikes perfectly. Each side of the holders are seperate so you can easily have one higher than the other for bikes with slanting cross-bars. |
› See all 368 customer reviews...
No comments:
Post a Comment